    |
  |
 |
24 bit A/D converter. |
|
ProFlash upgradeable firmware. |
|
MAS™ Windows based software. |
|
CE Compliant. |
|
512 Kilobyte non volatile memory. (Approx 400,000 samples) |
|
4.3"x2.3" (100mmx60mm) LCD screen. |
|
Long-life Nicad battery pack. |
|
RS232 Interface with cable. |
|
3 Year Warranty (on instrument only). |
 |
Temperature monitoring has been a task relegated to simple and unexciting chart recorders. Think temperature and you think
clumsy boxes that require constant attention with pen and paper refills. This is no longer true with the MMS3000-RTD6. The MMS3000-RTD6 is the low-cost RTD-dedicated product in the revolutionary MMS3000 series. With the MMS3000-RTD6 you can take extended recordings of up to 9,999 readings, and up to 60 hours between samples. The result is a test that can last weeks without the need to touch anything. Once finished, simply connect the unit to a standard PC and within minutes your data is easily downloaded to MAS™ for further analysis. Do you need to review temperature data in the field or on the plant floor away from the PC? Then the MMS3000-RTD6 is your instrument of choice. The large LCD enables you to graphically review recorded data by simply pressing a few keys.  Producing a variety of graphs and printout options. |
|
User Manual |
|
Product Specification PDF Document |
|
Software/Firmware |
| ITEM |
SPEC |
REMARKS |
||||||||||||||
| Model: MMS3000-RTD6 Incorporating 6 RTD Channels (3-wire) |
||||||||||||||||
| RANGE |
||||||||||||||||
|
|
-328 to +1562°F
(-200 to +850°C) |
Operating temperature range is determined by operating range of Pt100 RTD sensor. |
||||||||||||||
| RESOLUTION |
||||||||||||||||
|
|
0.1°F
or
°C |
|||||||||||||||
| ACCURACY |
||||||||||||||||
|
|
?0.1% of reading ?0.2°F
(0.1°C) |
The MMS3000-RTD6 is calibrated to the standard RTD temperature vs. resistance table given in DIN43760 (a = 0.00385; a = 0.00392 also supported). Total measurement accuracy depends on MMS3000-RTD6 accuracy and RTD accuracy. Only MMS3000-RTD6 accuracy is given here. |
||||||||||||||
| MINIMUM SAMPLING INTERVAL |
||||||||||||||||
|
|
|
Sampling interval is programmable from 0.2 seconds to 60 hrs. Note: Minimum time to scan all selected channels - not each channel. |
||||||||||||||
| DATA LOGGING |
||||||||||||||||
|
Data Storage |
512 kilobytes ?approx. 400,000 individual samples |
Non-volatile memory (with battery back-up). # of Samples depends on # of Data Sets and Recordings |
||||||||||||||
|
Data Storage Format |
Up to 50 named DATA SETS |
User-specified name entered from keypad |
||||||||||||||
|
|
Up to 50 RECORDINGS per data set |
Each recording has unique time/date stamp |
||||||||||||||
|
|
Up to 9,999 SAMPLES per recording |
Each sample contains data for all selected channels |
||||||||||||||
|
Data Set Name |
Up to 16 alpha-numeric characters |
|
||||||||||||||
| DISPLAY |
||||||||||||||||
|
|
LCD with graphic capabilities |
|
||||||||||||||
|
Resolution |
240 x 128 pixels |
|
||||||||||||||
|
Viewing Area |
4.3" x 2.3" (110mm x 60mm) |
|
||||||||||||||
|
Backlight |
Electro-luminescent |
|
||||||||||||||
| PROFLASH |
||||||||||||||||
|
|
Allows internal firmware to be upgraded via built-in serial port |
Download firmware upgrades via the Internet |
||||||||||||||
| COMMUNICATIONS |
||||||||||||||||
|
|
RS232- 15kV ESD Protected |
Cable with DB9 connector included |
||||||||||||||
|
Baud Rate |
9600, 19200, 57600 bits per second |
Automatic Baud Rate Selection |
||||||||||||||
| RTD INPUTS |
||||||||||||||||
|
Connector |
Sockets accept MTP miniaure 3-blade RTD plug |
|
||||||||||||||
|
Sensor Exitation Current |
350 - 420
µA
(nominal 380
µA) |
Current switched between selected channels. |
||||||||||||||
| BATTERY |
||||||||||||||||
|
Type |
Custom Nickel-Cadmium pack |
|
||||||||||||||
|
Voltage |
7.2 Volts nominal |
|
||||||||||||||
|
Capacity |
1500 mAh nominal |
|
||||||||||||||
|
Operating Time |
13 hrs with backlight off, 7 hrs backlight on - nominal |
|
||||||||||||||
| CHARGER AND CONDITIONER |
||||||||||||||||
|
|
Built-in dual rate charger ?Automatic and Manual control |
AC Adapter included (13.5 ?1.5 VDC, 1A output) |
||||||||||||||
|
Fast Charge Rate |
0.7A nominal |
2.5 hours for complete charge nominal |
||||||||||||||
|
Discharge Rate |
0.5A nominal |
Combats NiCad battery memory effect |
||||||||||||||
| MECHANICAL |
||||||||||||||||
|
Size |
9.7"W x 6.1"L x 3.0"H (247mm x 154mm x 75mm) |
Including protective boot |
||||||||||||||
|
Weight |
4.4lb (2kg) |
Including protective boot and strap |
||||||||||||||
| ENVIRONMENTAL |
||||||||||||||||
|
Temperature/Humidity |
|
|
||||||||||||||
|
Operating |
32°F
to 122°F
(0°C
to 50°C) / 70% RH |
Non-condensing |
||||||||||||||
|
|
32°F
to 86°F
(0°C
to 30°C) / 80% RH |
Non-condensing |
||||||||||||||
|
Storage |
14°F
to 140°F
(-10°C
to 60°C
) / 95% RH |
|
||||||||||||||
|
EMC |
EN50081-1 |
Radiated and conducted emissions |
||||||||||||||
|
|
EN50082-1 |
ESD Immunity and RF field immunity (EMI). |
||||||||||||||
| The manufacturer reserves the right to modify specifications without prior notice. |
||||||||||||||||