Alnor AirGard® 350 CEM Bio-Safety Cabinet Monitors
The AirGard 350CEM continuously monitors bio-safety cabinet exhaust velocity by measuring the air velocity of clean air passing through the remote probe mounted in the transition section above the HEPA filter or in the ductwork. The monitor then reports this information through readily understandable means to the user. An electronic bargraph moves back and forth through universally recognized red (danger), yellow (caution) and green (safe) colored zones as the velocity changes. Corresponding large colored lights also illuminate. A continuous audible alarm alerts of a dangerous situation when the face velocity is in an alarm condition. This information can be sent to other personnel in a remote location by means of a dry contact relay output. A digital display can be enabled to view velocity quantitatively. The monitor mounts with a bracket (provided) on the ledge of a bio-cabinet and operates from a low voltage transformer (provided).
Specifications
Display Range 300-2,000 fpm (1.52-10.16 m/s) Alarm Range 300-2,000 fpm (1.52-10.16 m/s) Alarm Delays User configurable through menu Relay Output NC, NO Remote Alarm Acknowledge Yes Units Selectable (English & Metric) Display--Visual Analog bargraph, red zone-alarm, yellow zone-marginal, green zone-normal. Jumbo LEDs (digital LCD can be enabled) Alarm Indications Jumbo red LED and audible alarm (85 db @ 4 in. [10 cm]) High Flow Alarm Disable Yes Horn Silence Temporary and permanent Mounting Flush or kit External Probe Exhaust duct mounted Calibration Actual velocity reading calibrated at factory Operating Temperature 50-95°F (10-35°C) Storage Temperature -40-150°F (-40-65°C) Power Requirement 9-30V AC/DC Dimensions-Front Face Plate 5.25 x 3.0 x 0.625 in. (13.3 x 7.62 x 1.59 cm) Rear Enclosure 3.0 x 2.0 x 0.5 in. (7.62 x 5.08 x 1.27 cm) Accuracy ± 10% of reading Agency Listings CE, UL
Model |
Description |
Part Number |
350 CEM |
Surface, ledge, or flush mount. Colored analog scale and digital flow indication. Includes mounting hardware, probe, wall plug-in power supply and owner's manual. | 670-335-500 |